OTR Flatbed Driver Jobs in Florida — Now Hiring

What does a flatbed driver actually haul?

Flatbed drivers haul cargo on open trailers without walls or a roof, transporting building materials, steel coils, heavy machinery, lumber, and other oversized or irregularly shaped freight. The job requires hands-on load securement using chains, straps, binders, and tarps — it's the most physically demanding segment of trucking. Flatbed consistently pays more than dry van because of the skill and effort involved.

You pull into a steel mill outside Gary, Indiana at 6 AM. The yard workers are already moving I-beams with an overhead crane. You position your trailer and watch as they set four bundles of structural steel across the deck — 44,000 pounds total, each bundle separated by dunnage. This is bread-and-butter flatbed freight. Once they're done, it's your turn. You grab your chain box from the side rail and start securing. Four chains per bundle, each one threaded through a winch on the trailer rail. You check the working load limit on each chain — 5,400 pounds for 3/8-inch Grade 70 — and make sure you've got enough aggregate WLL to exceed half the cargo weight. You crank each binder tight, then go around a second time checking for slack. The whole process takes about 45 minutes. No tarps needed for steel, which is a relief. You're delivering to a construction site in Louisville, 270 miles south on I-65. The roads are flat and the weight is distributed evenly, so the truck handles well. You stop at a rest area near Indianapolis to re-check your chains — steel shifts, especially the first 50 miles after loading. One chain has loosened slightly. You crank it tight and keep moving. At the construction site, a forklift operator unloads you while you pull chains and coil them back in the box. By 2 PM you're empty and heading to a lumber yard in Lexington for your next load. This one will need tarps — lumber has to stay dry. You'll spend another 30 minutes throwing a 90-pound tarp over the stack, pulling it tight with bungees, and checking that it won't flap loose at highway speed. It's hard work, but you're earning $0.62 a mile and you didn't sit in a dock for three hours.

Full flatbed driver guide — top carriers, endorsements and career path

Where in Florida would you actually be running?

Freight here moves on a handful of named lanes. These are the ones a flatbed seat domiciled in Miami is most likely to see.

• Jacksonville: I-95, I-10, I-295 — Port Operations and Automotive Import Processing freight.
• Tampa: I-75, I-4, I-275 — Phosphate Mining & Fertilizer and Petroleum Distribution freight.
• Miami: I-95, I-75, I-595 — International Trade (Latin America) and Perishable Goods & Flowers freight.
• Orlando: I-4, Florida Turnpike, I-75 (nearby) — Theme Parks & Tourism and Simulation & Defense Tech freight.

What does this flatbed seat pay in Florida?

The band on this posting is $58,000 - $82,500/year. Where you land inside it comes down to verifiable experience, the lane you take, and your safety record.

For context, the statewide CDL-A average is $56,500. Wages here are rising — Florida trucking wages are rising as population growth, port expansion (Jacksonville and Miami), and year-round produce shipping create sustained driver demand across the state.

Florida runs a cost-of-living index of 101, so this band is worth roughly $55,941 once living costs are taken out. That number is what to compare against an offer in another state.

• Strongest-paying metros in Florida:
• Miami — about $62,800
• Jacksonville — about $59,400
• Tampa — about $57,600

Florida CDL pay breakdown by experience level and equipment

What do you need to qualify?

• Valid CDL-A license
• DOT medical card
• Physical fitness — you'll be climbing on trailers, throwing tarps, and cranking binders
• Knowledge of FMCSA cargo securement rules (393.100-136)
• Most carriers prefer 6+ months of experience, though some train new drivers

Is flatbed work worth it?

What drivers who stay in this segment say they like about it:

• Highest-paying non-hazmat, non-oversized CDL-A segment — experienced drivers regularly clear $80K+
• No waiting at docks — you load and secure at job sites, steel mills, and lumber yards, usually outdoors
• Strong sense of craftsmanship — a well-secured load is a point of pride among flatbed drivers
• Diverse freight keeps the job interesting — one week it's steel beams, the next it's wind turbine blades

What is the hardest part of this job?

We would rather you know now than quit in week three.

• Physically demanding — tarping a load in summer heat or freezing rain is genuinely tough work
• Higher injury risk from climbing on trailers, handling chains, and working around heavy equipment
• Weather exposure is constant — you're securing loads in rain, snow, and 100-degree heat
• Construction freight slows in winter months in northern states, reducing available loads

What should a flatbed driver know before running Florida?

Running flatbed in Florida means working inside a 80,000 lbs (88,000 lbs on some designated state roads with permit) gross limit with 20,000 lbs single axle, 34,000 lbs tandem (increased on some state roads). Oversize and overweight loads go through FDOT Permits Office. Florida is accommodating to oversize loads with wide highways. Online permits available. Escort requirements for extra-wide loads.

Fuel tax in Florida is $0.36 per gallon diesel + federal, which matters if you are comparing per-mile offers across state lines. Inspection climate: High. Florida Highway Patrol commercial vehicle enforcement is active on I-95, I-75, and I-4. Agricultural inspections at border add additional stop time.

Which Florida rules catch flatbed drivers out?

• Gross weight limit: 80,000 lbs (88,000 lbs on some designated state roads with permit)
• Axle weight: 20,000 lbs single axle, 34,000 lbs tandem (increased on some state roads)
• Truck speed limits: 70 mph rural, 55-65 mph urban
• Diesel fuel tax: $0.36 per gallon diesel + federal
• Tolls: Extensive toll road network: Florida Turnpike, SunPass roads, I-75 Alley, Beachline (SR-528), Selmon Expressway. SunPass transponder essential for commercial vehicles.
• Inspection posture: High. Florida Highway Patrol commercial vehicle enforcement is active on I-95, I-75, and I-4. Agricultural inspections at border add additional stop time.
• Extensive toll road network requires SunPass or compatible transponder
• Agricultural inspection stations at Georgia border check all northbound produce
• Hurricane evacuation routes may restrict or redirect truck traffic during storm season

All Florida driving jobs and state regulations

How does applying through us work?

1. 1You send the short form on this page. It takes under a minute and needs no resume.
2. 2A recruiter reads it and calls you — a real person, not an automated screen.
3. 3We match you against the over-the-road flatbed openings our client carriers have right now, including ones never posted publicly.
4. 4You choose which to interview for. Nothing is submitted anywhere without you saying yes.
5. 5There is no cost to you at any point. Carriers pay us, drivers never do.

Are these jobs actually live?

Yes — and it is a fair thing to ask, because plenty of driver postings are not.

Ahmad Qazi, sales representative at TruckingJobsInUSA: “Carriers have filled seats through this platform. The owners we place drivers with are straightforward to deal with, and drivers get paid on time. If a seat is gone, we take the posting down rather than leave it up to collect applications.”

Every posting on this site is republished on the date shown, so what you are reading is current recruitment, not an archive.