OTR Oversized Driver Jobs in Minnesota — Now Hiring

What does a oversized driver actually haul?

Oversized and heavy haul drivers transport loads that exceed standard legal dimensions or weight limits — think wind turbine blades, bridge beams, mining equipment, modular homes, and industrial transformers. Every load requires state-specific oversize/overweight permits, and many loads need pilot cars, police escorts, and restricted travel times. This is the most specialized and highest-paying segment of trucking, reserved for the most experienced and skilled drivers.

You've been planning this move for two weeks. Today you're transporting a 150,000-pound mining shovel bucket from a fabrication shop in Tulsa, Oklahoma to a coal mine in Gillette, Wyoming — about 900 miles that will take four days at oversize speeds. Your trailer is a 13-axle RGN (removable gooseneck) stretched to 85 feet. The total rig length is 140 feet and 16 feet wide. At 6 AM the crane crew begins loading the bucket onto your trailer. This takes three hours with a 300-ton crawler crane. The rigging crew checks that the load is centered and the weight is distributed across all axle groups. You've already confirmed your permits for Oklahoma, Kansas, Nebraska, and Wyoming — each state issued separately with different travel time restrictions. Kansas says daylight only, no travel on I-70 east of Salina. Wyoming wants you off the road by 3 PM near school zones. Your pilot car drivers — one in front and one behind — check in by radio. The front pilot has a height pole mounted on their vehicle to check bridge clearances in real time. You pull out of the yard at 9 AM, making a wide right turn onto the highway that takes up both lanes. Traffic stops while you complete the turn. You're running at 35-40 mph on two-lane highways, avoiding interstates where possible because the load is too wide for standard lanes. Every bridge is a calculation — you've got the route survey on a clipboard showing the weight rating for every bridge and overpass. When you reach the Kansas border, you stop. Different state, different escort requirements. A Kansas Highway Patrol officer meets you and leads the convoy for the next 180 miles. At sunset you pull into a pre-arranged parking area — you can't just stop anywhere with a 16-foot-wide load blocking the shoulder. Three more days of this — early starts, slow speeds, constant radio communication with your pilot cars, and careful navigation of every curve and intersection. When you finally deliver to the mine site in Gillette, the client's crane crew takes another three hours to offload. You sign the delivery receipt and feel the satisfaction of having safely moved something most drivers would never attempt. Your pay for this single load: $12,000.

Full oversized driver guide — top carriers, endorsements and career path

Where in Minnesota would you actually be running?

Freight here moves on a handful of named lanes. These are the ones a oversized seat domiciled in Minneapolis is most likely to see.

• Minneapolis: I-94, I-35, I-494 — Agricultural Commodities and Medical Devices freight.
• Duluth: I-35, US-53, US-2 — Iron Ore Mining and Port Operations freight.
• Mankato: US-169, US-14, MN-22 — Food Processing and Agriculture (Corn, Soybeans) freight.

What does this oversized seat pay in Minnesota?

The band on this posting is $68,500 - $97,000/year. Where you land inside it comes down to verifiable experience, the lane you take, and your safety record.

For context, the statewide CDL-A average is $59,200. Wages here are stable — Minnesota wages are strong relative to cost of living, supported by the Twin Cities distribution hub, Target Corporation logistics, and significant agricultural freight (grain, sugar beets, turkeys).

Minnesota runs a cost-of-living index of 97, so this band is worth roughly $61,031 once living costs are taken out. That number is what to compare against an offer in another state.

• Strongest-paying metros in Minnesota:
• Minneapolis — about $64,800
• Saint Paul — about $63,200
• Rochester — about $58,400

Minnesota CDL pay breakdown by experience level and equipment

What do you need to qualify?

• Valid CDL-A with minimum 3-5 years of clean OTR experience
• Extensive knowledge of state permit systems — each state has different rules for oversize loads
• Ability to plan routes accounting for bridge weight limits, overhead clearances, and turning radii
• Experience with specialized trailers (lowboy, RGN, multi-axle, perimeter)
• DOT medical card and willingness to travel with pilot cars and escorts

Is oversized work worth it?

What drivers who stay in this segment say they like about it:

• Highest pay in trucking — experienced heavy haul drivers clear six figures routinely
• Elite status in the industry — heavy haul drivers are respected as the top professionals
• Fascinating freight — you'll move things most people never see up close, like 200-foot wind turbine blades
• Lower competition because the barrier to entry (experience and skill) is so high

What is the hardest part of this job?

We would rather you know now than quit in week three.

• Extremely high responsibility — a mistake with a 200,000-pound load on a 19-axle trailer can be catastrophic
• Permit logistics are a headache — multi-state loads require separate permits for each state with different rules
• Travel times are restricted — many states only allow oversize movement during daylight hours, no weekends or holidays
• Extended time away from home — heavy haul loads can take days to move across multiple states at 35-45 mph

What should a oversized driver know before running Minnesota?

Running flatbed in Minnesota means working inside a 80,000 lbs (88,000 lbs on state routes, higher with special permits) gross limit with 20,000 lbs single axle, 34,000 lbs tandem. Oversize and overweight loads go through MnDOT Freight Office. Online permitting through OSOW system. Spring weight restrictions on state highways are strictly enforced.

Fuel tax in Minnesota is $0.285 per gallon diesel + federal, which matters if you are comparing per-mile offers across state lines. Inspection climate: Moderate to high. MnDOT and Minnesota State Patrol focus on spring weight restriction enforcement and I-94/I-35 corridors.

Which Minnesota rules catch oversized drivers out?

• Gross weight limit: 80,000 lbs (88,000 lbs on state routes, higher with special permits)
• Axle weight: 20,000 lbs single axle, 34,000 lbs tandem
• Truck speed limits: 70 mph rural, 55 mph urban
• Diesel fuel tax: $0.285 per gallon diesel + federal
• Tolls: MnPASS Express Lanes on I-394 and I-35W in Minneapolis metro. Otherwise no toll roads.
• Inspection posture: Moderate to high. MnDOT and Minnesota State Patrol focus on spring weight restriction enforcement and I-94/I-35 corridors.
• Spring weight restrictions (March-May) reduce allowable weight on state highways by up to 40%
• Minnesota allows 88,000 lbs on 7-axle configurations on state routes
• Severe winter cold (below -30°F) can affect diesel fuel gelling

All Minnesota driving jobs and state regulations

How does applying through us work?

1. 1You send the short form on this page. It takes under a minute and needs no resume.
2. 2A recruiter reads it and calls you — a real person, not an automated screen.
3. 3We match you against the over-the-road oversized openings our client carriers have right now, including ones never posted publicly.
4. 4You choose which to interview for. Nothing is submitted anywhere without you saying yes.
5. 5There is no cost to you at any point. Carriers pay us, drivers never do.

Are these jobs actually live?

Yes — and it is a fair thing to ask, because plenty of driver postings are not.

Ahmad Qazi, sales representative at TruckingJobsInUSA: “Carriers have filled seats through this platform. The owners we place drivers with are straightforward to deal with, and drivers get paid on time. If a seat is gone, we take the posting down rather than leave it up to collect applications.”

Every posting on this site is republished on the date shown, so what you are reading is current recruitment, not an archive.