Local Cement Mixer Driver Jobs in Texas — Now Hiring

What does a cement mixer driver actually haul?

Cement mixer drivers operate front-discharge or rear-discharge concrete mixer trucks, delivering ready-mix concrete from batch plants to construction sites. The job is intensely time-sensitive — concrete begins setting within 60-90 minutes of mixing, so every delivery is a race against chemistry. Drivers need to understand slump tests, water-to-cement ratios, and how to pour concrete into forms, pump trucks, and wheelbarrows without compromising the mix. It's a skilled trade that pays well for CDL-B work.

3:45 AM. Your alarm goes off and you're moving. The first pour of the day is a foundation for a new Chick-fil-A in Chandler, Arizona, and the contractor wants mud on the ground by 5:30 AM — before the heat. You're at the batch plant by 4:15. The batch operator loads your 10-cubic-yard drum with a 4,000 PSI foundation mix — cement, sand, aggregate, water, and admixtures measured precisely by computer. The drum starts turning. You've got 90 minutes before this mix starts to set. You arrive at the job site at 5:10 AM. The concrete crew has the forms ready and a pump truck set up. You back up to the pump truck hopper and start pouring. The finisher on the ground yells up to add a gallon of water — the slump is too stiff. You add water carefully through the top of the drum and let it mix for 30 seconds. Too much water weakens the concrete; this is where experience matters. You pour all 10 yards into the pump in about 15 minutes. Back at the plant, you pull into the washout area. You spray down the drum interior, the chutes, and the hopper with a pressure washer. Hardened concrete left in the drum from a lazy washout will eventually ruin the drum fins and cost your company $15,000 in repairs. Washout takes 10-12 minutes if you do it right. Load two is a residential driveway in Mesa — 6 yards of 3,000 PSI. This one you pour directly from the chute into wheelbarrows the homeowner and his buddies are running. It's 8 AM and already 95 degrees. By the time you head back for load three, you're soaked in sweat and spattered with concrete. You'll make 5-6 loads today, each one a different site with different conditions. By 2 PM the plant stops batching — it's too hot for afternoon pours in Arizona summer. You do your final washout, park the truck, and clock out by 3 PM. Early start, early finish — that's the mixer life.

Full cement mixer driver guide — top carriers, endorsements and career path

Where in Texas would you actually be running?

Freight here moves on a handful of named lanes. These are the ones a cement mixer seat domiciled in Houston is most likely to see.

• Dallas: I-35E, I-30, I-20 — Technology and Consumer Goods Distribution freight.
• Houston: I-10, I-45, I-69 — Petrochemical and Oil & Gas Equipment freight.
• Laredo: I-35, US-59, US-83 — Cross-Border Trade and Customs Brokerage freight.
• San Antonio: I-35, I-10, I-37 — Military & Defense and Cross-Border Logistics freight.

What does this cement mixer seat pay in Texas?

The band on this posting is $55,000 - $78,000/year. Where you land inside it comes down to verifiable experience, the lane you take, and your safety record.

For context, the statewide CDL-A average is $62,400. Wages here are rising — Texas is one of the top trucking states with rising wages driven by energy sector hauling, cross-border trade through Laredo, massive DFW distribution growth, and Port of Houston activity.

Texas runs a cost-of-living index of 92, so this band is worth roughly $67,826 once living costs are taken out. That number is what to compare against an offer in another state.

• Strongest-paying metros in Texas:
• Houston — about $68,400
• Dallas — about $66,800
• Laredo — about $64,200

Texas CDL pay breakdown by experience level and equipment

What do you need to qualify?

• CDL-B license with air brake endorsement
• DOT medical card
• Understanding of concrete delivery procedures — slump testing, chute operation, washout protocols
• Physical fitness — you'll be handling heavy chutes, adding water, and washing out the drum multiple times daily
• Ability to navigate tight construction sites and back into precise pour locations

Is cement mixer work worth it?

What drivers who stay in this segment say they like about it:

• Higher pay than most CDL-B jobs — experienced mixer drivers earn $65K-$75K with overtime
• Home every night — all runs are local, typically within 30 miles of the batch plant
• Skilled work that carries respect on the job site — you're a critical part of the construction process
• Overtime is common during busy season, with Saturday pours paying time-and-a-half

What is the hardest part of this job?

We would rather you know now than quit in week three.

• Extremely early mornings — first loads often leave the plant by 4:30-5:00 AM for pre-dawn pours
• High-pressure time sensitivity — if the concrete sets up in the drum, you've got a 40,000-pound rock inside your truck
• Seasonal layoffs in northern states during winter when concrete work stops
• Concrete dust and splatter are corrosive — trucks require daily washout and drivers get covered in cement residue

What should a cement mixer driver know before running Texas?

Axle weight is what gets tickets written on aggregate and ready-mix work: Texas enforces 20,000 lbs single axle, 34,000 lbs tandem against an 80,000 lbs (84,000 lbs on state roads, higher with permit). Scale coverage: DPS weigh stations on I-10, I-20, I-35, I-30, I-40. Texas also has agricultural inspection stations. Border crossings at Laredo, El Paso, Brownsville, Eagle Pass.

Fuel tax in Texas is $0.20 per gallon diesel + federal, which matters if you are comparing per-mile offers across state lines. Inspection climate: Moderate to high. Texas DPS Motor Carrier Bureau is active. Focus on border crossings (Laredo, El Paso), I-35 corridor, and oil field areas.

Which Texas rules catch cement mixer drivers out?

• Gross weight limit: 80,000 lbs (84,000 lbs on state roads, higher with permit)
• Axle weight: 20,000 lbs single axle, 34,000 lbs tandem
• Truck speed limits: 85 mph on SH 130 (highest in US), 75 mph on most rural interstates rural, 55-65 mph urban
• Diesel fuel tax: $0.20 per gallon diesel + federal
• Tolls: Extensive toll network: SH 130, Dallas North Tollway, Sam Houston Tollway, Hardy Toll Road, LBJ Express, NTE Express, many more. TxTag/TollTag transponder essential.
• Inspection posture: Moderate to high. Texas DPS Motor Carrier Bureau is active. Focus on border crossings (Laredo, El Paso), I-35 corridor, and oil field areas.
• Texas has the highest speed limit in the US (85 mph on SH 130)
• Extensive toll road network across Dallas-Fort Worth, Houston, and Austin metro areas
• Oil field equipment hauling is a massive industry in west Texas (Permian Basin)

All Texas driving jobs and state regulations

How does applying through us work?

1. 1You send the short form on this page. It takes under a minute and needs no resume.
2. 2A recruiter reads it and calls you — a real person, not an automated screen.
3. 3We match you against the local cement mixer openings our client carriers have right now, including ones never posted publicly.
4. 4You choose which to interview for. Nothing is submitted anywhere without you saying yes.
5. 5There is no cost to you at any point. Carriers pay us, drivers never do.

Are these jobs actually live?

Yes — and it is a fair thing to ask, because plenty of driver postings are not.

Ahmad Qazi, sales representative at TruckingJobsInUSA: “Carriers have filled seats through this platform. The owners we place drivers with are straightforward to deal with, and drivers get paid on time. If a seat is gone, we take the posting down rather than leave it up to collect applications.”

Every posting on this site is republished on the date shown, so what you are reading is current recruitment, not an archive.